Connecting multiple eMPAGE (maximum 4 in MIMO88 and 3 in MIMO SG not compatible with MIMO4040CDN or MIMO7272DN) is possible by connecting from the MIMO REMOTE ports to each eMPAGE in Daisy Chain (daisy chaining one station to the next). First of all set the internal jumpers of all eMPAGE to "CAN" position. The last eMPAGE on the remote bus must have jumper J112-J111. On all eMPAGE except the last one you must use the RJ-45 - Euroblock adapter to be able to perform the Daisy Chain correctly. Check the image by clicking here. Note (see drawing above) also that the balanced audio signal cables from the microphones of each station (+ and -, as the ground is shared with the power bus), should be connected directly to a MIMO input, without a Daisy Chain connection in this case.The power supply to the different call or remote stations comes through the REMOTE port, but in case you have long distances or more than one device you will have to incorporate external power supplies for the eMPAGE (WP24-PSU - not included). Detailed information is available in the eMPAGE manual.
