There are three different operation modes. Check the image by clicking here:
- Auto select mode: automatically selects the mode of operation suited for either a unicast or a Multicast.
- Active on link: when an active USB device, like for example a pc mouse or keyboard, every action of any of those peripherals will be immediately shown in the screen without any priority in a best effort type of scenario.
- Active per request: in this mode, the first peripheral to begin action is the one that will retain control. If another device starts action while there’s another one in control, this second device will have to wait until the first one stops.
In addition, the last two modes also do not distinguish between VEO-XRI2L receivers, which allows the peripherals to be connected to the desired device. If the connection is a unicast connection, the "Active per request" mode does not make much sense because there is always only one device in control. In the case of a multicast connection, the receivers will act in the same way in either traditional or videowall composition mode.