Connection in Remote ½ is a BUS CAN, and it connects to different devices using Daisy-Chain. Resistance of 120 Ohm should be applied to last device connected to the bus connector. Maximum length can get up to 1Km with CAT5 cable. Consult in manual how to make this connection. Below you will find WPTOUCH example. Check the image by clicking here. Paging stations and remote controls can be powered from the REMOTE port on the MIMO / MIMOSG devices. But with large distances or multiple devices connected, it’s recommended to use separate power supplies reinforcing power supply on the bus.To calculate how many power supplies are needed, use our calculator:
