“Turn off screen on video host” parameter will affect on how this feature works. Check the image by clicking here:
- Not active: if this parameters is not checked, the figure introduced on “Timeout for Detecting Video Lost” dialog (Figure 3) will define the time between the instant that the video loss is detected and that the VEO-XRI2L stand-by splash screen appears (Figure 4).
- Active: if this box is checked, the span specified in the “Timeout for Detecting Video Lost” dialog will work as in the alternate scenario but this now, instead of showing the VEO-XRI2L stand-by splash screen, the “no video signal detected” message available in every display will appear, letting the system shut down the screen automatically.
If “Never Timeout” parameter is selected instead of an actual time, the last video active frame will be shown when a video loss signal is produced until the transmission is detected again or the VEO-XTI2L transmitter is reset (Figure 5). Check the image by clicking here.