It’s possible to connect multiple MPAGE16 (maximum of 4 in MIMO, and 3 in MIMO SG) from the REMOTE ports on MIMO to each MPAGE16 using a daisy-chain connection (connected as a chain). Last MPAGE16 in a daisy-chain connection needs to have a resistance of 120 Ohm connected between data terminals. See image below and confirm your balanced microphone audio signal cables of each station (+ and -, ground is shared between bus and power supply), should connect directly to MIMO input, without daisy-chain connection. (Check the image by clicking here) Power supply for each paging stations or remotes is applied through REMOTE port, but in longer distances or with multiple devices; additional power supply should be implemented. To calculate how many power supplies are required, use our calculator.
