Choose your network adapter which corresponds to your network connection. This selection box appears when you open EclerNet Manager or in the Edit > Preferences menu.
Check the image by clicking here.
If you connect your EclerNet device directly to PC (point-to-point), EclerNet Manager software should automatically detect it. If you select “U” (Online and Unused Device List) in the window located in the lower-left corner in EclerNet Manager, you should see an Ecler device you are connected to.
Right-click on your device and choose “Network Configuration”. Check the image by clicking here.
Put your new IP address In “IP Address” field. It needs to be in the same network range as the IP address of your PC. See section “What IP address and Subnet Mask should be used?”
Example:
- PC (with EclerNet Manager): IP Address: 10.5.5.30 // Subnet Mask: 255.255.255.0
- Ecler device: IP Address: 10.5.5.33 // Subnet mask: 255.255.255.0
After saving changes, Ecler device will reboot and it will appear again on the list with the new IP and subnet mask.
Now you can include Ecler device in your project (drag&drop on top of Devices/All) and you can establish connection and take control of your device.
For more information see this video